Groove Profile Wheel | Ø65×40 mm | Polyamide | 40 mm Profile | 12 mm Profile Groove | 80 kg

Groove Profile Wheel Ø65×40 mm – Polyamide 6G for 40 mm Aluminum Profile

Compatibility: Suitable for 40 mm aluminum profile systems, including profiles from item®, Fath®, and Bosch Rexroth® (groove width 6 / 8 / 10 / 12 mm depending on variant).

The Ø65×40 mm groove profile wheel made of Polyamide 6G is specifically designed for precise guidance in 40 mm aluminum profiles – for shelves, material trolleys, workbenches or linear axes that require smooth and low-play movement. The groove geometry positively engages with the aluminum profile, enabling silent linear movement without additional guiding elements. More application examples can be found on our Solutions Page for Conveyor Technology and Mechanical Engineering.

Bearing Options

The groove profile wheel is available in three variants:

• With ball bearing: Double-sealed deep groove ball bearing made of steel – low maintenance, can be mounted directly on an axle or pin, for rotating wheels.
• With stainless steel ball bearing: Same as the ball bearing version, but with a stainless steel ball bearing for damp or corrosive environments.
• With keyway: Form-fit shaft connection according to DIN 6885 – for driven wheels or when the wheel needs to be firmly connected to the shaft.

Technical Features

• Outer diameter: 65 mm
• Wheel width: 40 mm
• Hub length: 40 mm
• Bore: Ø12 mm
• Running width: 11.8 mm
• Groove width: 12 mm
• Load capacity: 80 kg
• Suitable for: 40 mm aluminum profile (item®, Fath®, Bosch Rexroth® etc.)
• Material: Polyamide 6G (PA6G), cast and turned
• Electrically non-conductive, food-grade

Areas of Application

• Shelving and storage systems with linear guidance
• Material trolleys and mobile workbenches
• Linear axes in special machines and fixtures
• Assembly systems with profile rail systems (item®, Fath®, Bosch Rexroth®)
• Intralogistics and light conveyor technology

Notes

Please check the profile groove dimensions and axle diameter before ordering. For the keyway version, DIN 6885 applies – suitable keyway dimensions can be found in the technical data. Special dimensions on request.

Trademark Notice / Compatibility Notice

item®, Fath®, and Bosch Rexroth® are registered trademarks of their respective owners. The groove profile wheels offered on this page are not original products from these manufacturers, but compatible accessories. The mention of brand names serves exclusively to describe compatibility.