Groove Profile Wheel | Ø80×30 mm | Polyamide | 30 mm Profile | 8 mm Profile Groove | 120 kg

Grooved Profile Wheel Ø80×30 mm – Polyamide 6G for 30 mm Aluminum Profile

Compatibility: Suitable for 30 mm aluminum profile systems, including compatibility with profiles from item®, Fath®, and Bosch Rexroth® (groove width 6 / 8 / 10 / 12 mm depending on the variant).

The grooved profile wheel Ø80×30 mm made of Polyamide 6G is specifically designed for precise guidance in 30 mm aluminum profiles – for shelves, material carts, workbenches or linear axes that need to be moved smoothly and with minimal play. The groove geometry engages positively with the aluminum profile and enables quiet linear movement without additional guide elements. More application examples can be found on our solution page for conveying technology and mechanical engineering.

Bearing Options

The grooved profile wheel is available in three variants:

• With ball bearing: Double-sealed deep groove ball bearing made of steel – low maintenance, mountable directly on an axle or bolt, for rotating wheels.
• With stainless steel ball bearing: As the ball bearing version, but with a stainless steel ball bearing for damp or corrosive environments.
• With hub keyway: Rotationally rigid shaft connection according to DIN 6885 – for driven wheels or when the wheel is to be firmly connected to the shaft.

Technical Features

• Outer diameter: 80 mm
• Wheel width: 30 mm
• Hub length: 30 mm
• Bore: Ø8 mm
• Running width: 7.8 mm
• Groove width: 8 mm
• Load capacity: 120 kg
• Suitable for: 30 mm aluminum profile (item®, Fath®, Bosch Rexroth® and others)
• Material: Polyamide 6G (PA6G), cast and turned
• Electrically non-conductive, food-grade

Areas of Application

• Shelves and storage systems with linear guidance
• Material carts and mobile workbenches
• Linear axes in special machines and fixtures
• Assembly systems with profile rail systems (item®, Fath®, Bosch Rexroth®)
• Intralogistics and light conveying technology

Notes

Please check the profile groove dimension and axle diameter before ordering. For the hub keyway version, DIN 6885 applies – suitable keyway dimensions can be found in the technical data. Special dimensions on request.

Brand Notice / Compatibility Notice

item®, Fath®, and Bosch Rexroth® are registered trademarks of their respective owners. The grooved profile wheels offered on this page are not original products of these manufacturers, but compatible accessories. The mention of brand names serves exclusively to describe compatibility.