Grooved Profile Wheel | Ø80×30 mm | Polyamide | 30 mm Profile | 12 mm Profile Groove | 120 kg

Grooved Profile Wheel Ø80×30 mm – Polyamide 6G for 30-mm Aluminum Profile

Compatibility: Suitable for 30-mm aluminum profile systems, including compatibility with profiles from item®, Fath®, and Bosch Rexroth® (groove width 6 / 8 / 10 / 12 mm depending on variant).

The Ø80×30 mm grooved profile wheel made of Polyamide 6G is specifically designed for precise guidance in 30-mm aluminum profiles – for shelves, material trolleys, workbenches or linear axes that require smooth and low-play movement. The groove geometry positively engages with the aluminum profile, enabling silent linear movement without additional guiding elements. More application examples on our Solutions Page for Conveyor Technology and Mechanical Engineering.

Bearing Options

The grooved profile wheel is available in three variants:

• With Ball Bearing: Double-sealed deep groove ball bearing made of steel – low maintenance, directly mountable on axle or bolt, for idler wheels.
• With Stainless Steel Ball Bearing: Same as ball bearing version, but with stainless steel ball bearing for wet or corrosive environments.
• With Hub Keyway: Torque-resistant shaft connection according to DIN 6885 – for driven wheels or when the wheel needs to be firmly connected to the shaft.

Technical Features

• Outer diameter: 80 mm
• Wheel width: 30 mm
• Hub length: 30 mm
• Bore: Ø12 mm
• Running width: 11.8 mm
• Groove width: 12 mm
• Load capacity: 120 kg
• Suitable for: 30-mm aluminum profile (item®, Fath®, Bosch Rexroth® among others)
• Material: Polyamide 6G (PA6G), cast and turned
• Electrically non-conductive, food-grade

Areas of Application

• Shelves and storage systems with linear guides
• Material trolleys and mobile workbenches
• Linear axes in special machinery and fixtures
• Assembly systems with profile rail systems (item®, Fath®, Bosch Rexroth®)
• Intralogistics and light conveyor technology

Notes

Please check profile groove dimensions and axle diameter before ordering. For the keyway hub version, DIN 6885 applies – suitable keyway dimensions can be found in the technical data. Special dimensions on request.

Brand Notice / Compatibility Notice

item®, Fath®, and Bosch Rexroth® are registered trademarks of their respective owners. The grooved profile wheels offered on this page are not original products from these manufacturers, but compatible accessories. The mention of brand names serves solely to describe compatibility.