Flange-mounted drive wheel with hub groove | PU or Vulkollan on S355 steel core | Flange Ø 345 mm | Tread Ø 300 mm
928,65 €
IVA incluído
755,00 €
sem IVA
Custom manufacturing
Delivery time on request
Custom manufacturing – delivery time on request.
Technische Daten
Wheel diameter (D)
300mm
Spurkranz-Ø (D2)
345mm
Wheel width (B)
90.0mm
Load capacity
7000kg
Axle hole (d1)
60.0mm
Hub length (C)
90.0mm
Spurkranzlage (E)
Spurlos
Ja
Kontaktverfärbungsfrei
Ja
Material
Polyurethan MDI-PU,
Vulkollan
Härte der Lauffläche
92° Shore A.
Flanged Drive Wheel with Keyway | PU or Vulkollan® Tread on S355 Steel Core | Flange Ø 345 mm | Tread Ø 300 mm
Lathed flanged drive wheel with keyway according to DIN 6885 and cast elastomer tread. The keyway accommodates a feather key for positive torque transmission to the drive shaft. The S355 steel core carries the load, while the PU or Vulkollan® tread absorbs shocks.
Tread — Selection
Polyurethane MDI — High-quality MDI polyurethane, abrasion-resistant, oil-resistant, and with good damping. Economical choice for medium to high loads. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.
Vulkollan® — Premium elastomer from Covestro, highest load capacity with elastic running, extremely abrasion-resistant, capable of continuous loading. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.
Core Material: Steel S355 (bright)
Structural steel S355 with a minimum yield strength of 355 N/mm², good workability, high strength. Standard material for driven industrial wheels.
Typical Applications
Driven flanged wheels for AGVs, AGV drives, gantry cranes, trolleys, motor-driven chassis, and all applications with positive shaft connections.
Customization Note
These wheels are manufactured to order. Delivery time upon request. Special diameters, different axle bore tolerances, hub lengths, or keyway sizes available upon request.