Technical datasheet
Flanged wheel | S355 / 1.4301 | flange Ø: 110 mm | wheel Ø: 80 mm | ball bearing or hub groove
Item number: SPR-9743PN/060/75/40
Variant: with ball bearing / Steel S355
Description
Solid turned flanged wheel for permanent use in rail and profile guides. The circumferential flange keeps the wheel securely on the tread – whether on flat rails, angle iron or special profiles – and prevents lateral run-out even under load and transverse forces. Material Steel S355 (bright) — structural steel with a minimum yield strength of 355 N/mm², easy to weld and machine. Surface untreated. For outdoor use or damp environments, additional corrosion protection is recommended.
Technical data
| Wheel diameter (D) | 80 mm |
|---|---|
| Flanged wheel diameter (D2) | 110 mm |
| Wheel width (B) | 50 mm |
| Tread width (T) | 40 mm |
| Load capacity | 800 kg |
| Bore (d1) | 20 mm |
| Hub length (C) | 50 mm |
| Flange position (E) | 13 mm |
| Suitable for autoclaving | No |
| Non-marking | No |
| Non-marking | No |
| Heat-resistant | No |
| Conductivity | Conductive |
| Temperature | -20 °C to +100 °C |
| Material | Steel S355, Stainless steel 1.4301 |
| Tread hardness | 200 230 HB |
Manufacturer
rollen-direkt - Heidestr. 38 a - 59174 Kamen - Phone 02307 - 9645239
Safety information
This wheel is intended exclusively for the transport and guidance of goods. Transporting persons is not permitted. Before installation, make sure the system is shut down and secured. Bolt the wheel firmly and without play – a hanging or loose mounting can lead to uncontrolled detachment and accidents. During operati...