Technical datasheet
Flanged wheel | S355 / 1.4301 | flange Ø: 290 mm | wheel Ø: 250 mm | ball bearing or hub groove
Item number: SPR-9620K/250/290/75
Variant: with ball bearing / Steel S355
Description
Flanged wheel | steel S355 or stainless steel 1.4301 | flange Ø 290 mm | wheel Ø 250 mm Solid turned flanged wheel for permanent use in rail and profile guides. The continuous flange keeps the wheel securely on the running surface – whether on flat rails, angle iron or special profiles – and prevents lateral displacement even under load and cross forces. Material
Technical data
| Wheel diameter (D) | 250 mm |
|---|---|
| Flanged wheel diameter (D2) | 290 mm |
| Wheel width (B) | 75 mm |
| Tread width (T) | 60mm |
| Load capacity | 5600 kg |
| Hub length (C) | 75 mm |
| Flange position (E) | 17mm |
| Suitable for autoclaving | No |
| Non-marking | No |
| Non-marking | No |
| Heat-resistant | No |
| Conductivity | Conductive |
| Temperature | -20 °C to +100 °C |
| Material | Steel S355, Stainless steel 1.4301 |
| Tread hardness | 200 230 HB |
Manufacturer
rollen-direkt - Heidestr. 38 a - 59174 Kamen - Tel. 02307 - 9645229
Safety information
This wheel is intended exclusively for the transport and guidance of goods. Transporting persons is not permitted. Before installation, make sure the system is shut down and secured. Bolt the wheel firmly and without play – a hanging or loose mounting can lead to uncontrolled detachment and accidents. During operati...