Transport swivel castor 100 mm | PU wheel | aluminium rim | ball bearing | warehouse & intralogistics
48,32 €
incl. VAT
38,50 €
excl. VAT
Volume pricing – price per unit
The volume price is applied automatically in the cart.
Production or assembly
approx. 3–7 days
The item will be assembled after receipt of your order.
Customers rate us 4.6/5 based on 18 reviews.
Free shipping from €99 net
Delivery in 1–3 working days
Personal advice: +49 2307 9644987
Specialist retailer online since 2004
Technical data
Wheel diameter (D)
100 mm
Wheel width (B)
40 mm
Load capacity
320 kg
Overall height
135 mm
Hole Ø
9 mm
Bolt hole spacing
80 x 60 mm
Plate size
100 x 85 mm
Fastening
Plate
Weight
2 kg
Material
Polyurethane (PU)
Temperature
-20 °C to +80 °C
Transport swivel castor Ø 100 mm – polyurethane wheel, aluminium rim
The housing is made of welded steel sheet, galvanised on the surface and therefore protected against corrosion. The swivel head is fitted with ball bearings and runs smoothly even under load. The wheel consists of an aluminium rim with a hard-wearing polyurethane tread (92 Shore A, flat tread profile, yellow) and runs on a precision ball bearing. Load capacity: 320 kg.
Application
The swivel castor is used on assembly, multi-tier and transport trolleys in daily in-plant transport. The hard polyurethane tread rolls easily, is hard-wearing and leaves no marks; the aluminium rim keeps the wheel weight low.
Temperature
-20 °C to +80 °C
Heat resistant
Non-staining
Non-marking
Autoclavable
Product weight
2 kg
Rolling resistance
Damping
Wear resistance
Corrosion resistance
Technical datasheet
Product datasheet with description, article number, product image and technical data.
Importer: rollen-direkt - Heidestr. 38 a - 59174 Kamen - Tel. 02307 - 9644987
Swivel castor
Do not exceed the maximum load capacity per castor – distribute the total load evenly across all castors
Use only on level, clean surfaces – unevenness, rails or gaps may cause jamming
Never use swivel castors as the sole fastening – always combine with sufficient fixed castors (recommendation: 2 swivel + 2 fixed castors)
Regular visual inspection for wear, cracks or damage to the wheel and castor housing
Do not use on inclines or descents without additional securing
Check the tightening torque of the mounting screws regularly
Fixed castor
Observe the direction of travel – fixed castors are not swivel castors and must not be subjected to lateral loads
Avoid lateral impact loads – may cause rim or bearing failure
Always use in combination with swivel castors
Check that the fastening has sufficient load-bearing capacity in the substructure
Regularly check the ball bearing for ease of running
Swivel castor with brake
Always engage the brake when the vehicle is stationary – especially on sloping surfaces
Never engage the brake under load – stop first, then brake
Do not use the brake as a permanent load support on inclines – only as a safeguard on level surfaces
Regular functional test of the braking mechanism – the brake must engage and release without force
If the brake is defective, replace the castor immediately – do not continue to use it
Operate the brake only with the foot – never with a tool or by kicking against the wheel