Flanged drive wheel with hub groove | PU or Vulkollan on S355 steel core | Flange Ø 240 mm | Tread Ø 200 mm
463,39 €
IVA incluído
376,74 €
sem IVA
Custom manufacturing
Delivery time on request
Custom manufacturing – delivery time on request.
Technische Daten
Wheel diameter (D)
200mm
Spurkranz-Ø (D2)
240mm
Wheel width (B)
60.0mm
Load capacity
2500kg
Axle hole (d1)
35.0mm
Hub length (C)
60.0mm
Spurkranzlage (E)
Spurlos
Ja
Kontaktverfärbungsfrei
Ja
Flanged Drive Wheel with Keyway | PU or Vulkollan® Tread on S355 Steel Core | Flange Ø 240 mm | Running Ø 200 mm
Turned flanged drive wheel with keyway according to DIN 6885 and molded elastomer tread. The keyway accommodates a feather key for form-fitting torque transmission to the drive shaft. The S355 steel core bears the load, while the PU or Vulkollan® tread absorbs shocks.
Tread — Selection
Polyurethane MDI — High-quality MDI polyurethane, abrasion-resistant, oil-resistant, and with good damping properties. Economical choice for medium to high loads. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.
Vulkollan® — Premium elastomer from Covestro, highest load capacity with elastic running, extremely abrasion-resistant, capable of continuous loads. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.
Core Material: Steel S355 (bright)
Structural steel S355 with minimum yield strength of 355 N/mm², good machinability, high strength. Standard material for driven industrial wheels.
Typical Applications
Driven flanged wheels for AGVs, AGV drives, gantry cranes, trolleys, motor-driven chassis, and all applications with form-fitting shaft connections.
Note on Customization
These wheels are manufactured to order. Delivery time upon request. Special diameters, different bore tolerances, hub lengths, or keyway sizes available upon request.